Yamaha M7CL-48ES Manual do Utilizador descarregar pdf

This supplementary manual explains the functionality that was added or changed in

M7CL firmware V3.5. Please read it together with the M7CL V3 operating manual.

 Support for AuviTran Network ASIO Streamer

(M7CL-48ES)

• By connecting the M7CL-48ES’s [3rd] port to a com-

puter via a LAN cable, you can now perform direct

recording or conduct a sound check using the playback

from your DAW software (p.2).

 Support for remote operation of an external

head amp connected to a slot (M7CL-48ES)

• An external head amp connected via the M7CL-48ES’s

slot 1 can now be operated remotely (p.4).

 ALTERNATE function added

• By holding down a user-defined key to which the

ALTERNATE function is assigned and operating an

encoder in the SELECTED CHANNEL area, you can

now perform operations such as switching a parameter

on/off (p.6).

 Improved EQ operability

• The EQ [Q] encoder now allows you to switch between

peaking and shelving types (p.7).

• The PEQ “Q” parameter value goes up to 16.

 Added a File Load option (M7CL-48ES)

• When loading an M7CL settings file (*.M7C), you can

now select whether the AUTO CONFIGURE settings

will be applied to the console (p.7).

 Support for using the HA encoders to control

attenuation values

• HA KNOB FUNCTION has been added to the PREF-

ERENCE page of the USER SETUP popup window.

This lets you choose whether rotating the HA encoder

of the SELECTED CHANNEL area will control the

head amp gain or the digital attenuation. This setting

will also be applied to the OVERVIEW screen.

 Other

• The PRE/POST status is now indicated by the index

color of the SEND LEVEL knobs (p.7).

• You can now access the CH LINK MODE popup win-

dow by pressing two [SEL] keys of the input channels

simultaneously.

• ATT has been added to the CH LINK parameters.

• Even if another user locked the console, it can now be

unlocked by an administrator password.

M7CL V3.5 Supplementary Manual

Main changes

1 2 3 4 5 6 7 8

Resumo do Conteúdo

Página 1 - Main changes

1This supplementary manual explains the functionality that was added or changed in M7CL firmware V3.5. Please read it together with the M7CL V3 operat

Página 2 - Streamer

2By connecting the M7CL-48ES’s [3rd] port to a computer (in which the AuviTran Network ASIO Streamer Driver has been installed) via a LAN cable, direc

Página 3 - Sound check

3To conduct a sound check using audio that was previously recorded on a computer, change the M7CL-48ES’s settings as follows.1Press the SETUP button t

Página 4 - Connecting an AD8HR via

4Now you can remotely control an external head amp con-nected to the M7CL-48ES’s slot 1.By using this in conjunction with the EtherSound port built in

Página 5 - Connecting an SB168-ES via

5If you want to remotely control an SB168-ES via one of the M7CL-48ES’s slots, install an MY16-ES64 Ether-Sound card into the M7CL-48ES’s slot 1, and

Página 6 - ALTERNATE function added

6In order to remotely control an external head amp con-nected via the M7CL-48ES’s slot, an EXTERNAL HA tab has been added to the VIRTUAL RACK window w

Página 7 - PRE (white) POST (black)

7If you have selected a LOW band or HIGH band whose type can be switched, you can switch the type by turning the EQ[Q] encoder while pressing it when

Página 8