Yamaha QL5/QL1 Firmware Manual do Utilizador descarregar pdf

QL5/QL1 Firmware Update Guide 1

QL5/QL1 Firmware Update Guide

Thank you for choosing a Yamaha product.

This guide explains how to update the QL series (QL5 and QL1) firmware and its built-in Dante

module firmware.

■ Precautions (Please be sure to read this section first!)

・ The user assumes full responsibility for the update.

・ Update the firmware components one unit at a time.

・ Please note that the device may be damaged if you fail to follow these instructions properly, or

turn off the device or disconnect the cable while the update is in progress.

・ If the update fails, and the device still does not operate correctly even after you execute the update

once again, please contact your Yamaha dealer.

・ Yamaha Corporation owns exclusive copyrights for the QL series firmware, its update program,

and the update guide.

・ Audinate owns exclusive copyrights for the Dante firmware and its update program.

・ It is prohibited to duplicate or modify the firmware, software or guides, in part or in their entirety,

without permission from the copyright owner.

・ The screen shots in this guide are for use with this update procedure only and may be different

from the actual screen shots.

・ Dante is a registered trademark of Audinate.

・ Windows is a registered trademark of Microsoft ® Corporation in the United States and other

countries.

・ The company names and product names in this document are the trademarks or registered

trademarks of their respective companies.

1 2 3 4 5 6 ... 11 12

Resumo do Conteúdo

Página 1

QL5/QL1 Firmware Update Guide 1 QL5/QL1 Firmware Update Guide Thank you for choosing a Yamaha product. This guide explains how to update the QL

Página 2 - ■ Preparing for the update

QL5/QL1 Firmware Update Guide 10 6. Click [Next]. ・ Dante Firmware Update Manager may be blocked by the Windows Firewall. Select the [Private

Página 3 - ■ Update procedure sequence

QL5/QL1 Firmware Update Guide 11 About Failsafe Mode During normal operation, software must be loaded from a flash memory drive during operation

Página 4

QL5/QL1 Firmware Update Guide 12 7. Select [Start]→[All programs]→[Audinate]→[Dante Firmware Update Manager]→[Dante Firmware Update Manager ] ,

Página 5 - 3. Click [Properties]

QL5/QL1 Firmware Update Guide 2 Checking the version number You may check the QL main firmware version number and the Dante firmware version

Página 6 - 6. Click [OK]

QL5/QL1 Firmware Update Guide 3 Update procedure sequence Update each firmware component in the following sequence. If you plan to update mult

Página 7

QL5/QL1 Firmware Update Guide 4 Install the Dante Firmware Update Manager Before you update the Dante firmware, you must install the Dante Firm

Página 8

QL5/QL1 Firmware Update Guide 5 TCP/IP settings of computer Before you update the Dante firmware, you must modify your computer’s TCP/IP setti

Página 9

QL5/QL1 Firmware Update Guide 6 6. Click [OK].

Página 10 - 9. Restart the QL series

QL5/QL1 Firmware Update Guide 7 Updating the QL series firmware Described below are the procedures to update the QL series unit firmware. Unco

Página 11 - ■About Failsafe Mode

QL5/QL1 Firmware Update Guide 8 12. When an "Are you sure ?" message appears, press the OK button. Initializing the internal memory w

Página 12

QL5/QL1 Firmware Update Guide 9 Updating the Dante firmware Described below are the procedures to update the Dante module firmware integrated

Comentários a estes Manuais

Sem comentários

Yamaha QL5/QL1 Firmware Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Monitor tátil Yamaha QL5/QL1 Firmware. Yamaha QL5/QL1 Firmware Update Manual Manual do Utilizador

Resumo do Conteúdo

Comentários a estes Manuais