Yamaha PMT-L21 Manual do Proprietário

Ceiling Mount BracketPMT-L21 (for Low Ceilings)PMT-H25 (for High Ceilings)Installation ManualBe sure to read this manual thoroughlybefore using this b

E-10INSTALLATION EXAMPLESWhen installing to a wooden ceiling1 Drill matching holes through the reinforcingplate and the ceiling in the proper location

E-11EnglishFrançaisDeutschSvenskaItalianoEspañolNederlandsINSTALLING THE PROJECTOR1 Attach the projector mounting adapter onto the projector.Align the

E-123 Install the ceiling bracket on the ceiling.First hand-tighten the four nuts, determine the position, and then tighten the nuts securely.(PMT-L21

E-13EnglishFrançaisDeutschSvenskaItalianoEspañolNederlands5 Attach the safety brackets.Align the safety brackets so that the mounting guide pin fits i

E-14ADJUSTING THE PROJECTION ANGLEBefore adjustment• Turn the projector on and project an image, following the instructions on the owner’s manual of t

E-15EnglishFrançaisDeutschSvenskaItalianoEspañolNederlands2 Adjust the vertical angle.Adjust the projector so that the projected image is centered ver

E-16SPECIFICATIONSProduct Name Ceiling Mount BracketModel No. PMT-L21 PMT-H25Height789 to 1359 mm (31-1/16 to 53-1/2 inch)(variable in 30 mm (1-3/16-i

Additional Installation Information / Informations de montage supplémentaires /Zusätzliche Installationshinweise / Extra anvisning angående montering

PMT-L21/PMT-H25SAFETY INSTRUCTIONS1. Always follow the instructions set forth in this manual when installing the projectorusing this bracket.Improper

E-3EnglishFrançaisDeutschSvenskaItalianoEspañolNederlands9. Never hang from the projector or the ceiling bracket.Hanging from the projector or the cei

E-4PACKING LISTCheck that all of the following parts are included.PMT-L21Ceiling bracket x 1PMT-H25Ceiling bracket x 1Common parts (The following part

E-5EnglishFrançaisDeutschSvenskaItalianoEspañolNederlandsNAMES OF PARTSPMT-L21Ceiling bracketProjector mounting adapterTilt angle adjustment screws(Th

E-6PMT-H25Height locking screwCeiling bracketProjector mounting adapterTilt angle adjustment screws(There are also screws on theopposite side.)Horizon

E-7EnglishFrançaisDeutschSvenskaItalianoEspañolNederlandsDIMENSIONS OF PARTSProjector mounting adapterwith the LPX-500 installed[Top View]PMT-H25[Fron

E-8SCREEN SIZE AND SETTING-UP DISTANCEThe distance between the projector and the screen (16:9) determines the actual image size.Recommended distance:

E-9EnglishFrançaisDeutschSvenskaItalianoEspañolNederlandsPMT-H25 height adjustmentThe height adjustment pole for the PMT-H25 has holes spaced 3 cm apa