Yamaha 40D Manual do Proprietário Página 1

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONT

Controls and functions8 En1 HDMI indicatorLights up when the signal of the selected input source is input at the HDMI IN jack(s).2 TUNER indicatorsLig

Adjusting the system parameters98 EnThis unit has additional menus that are displayed in the front panel display. These menus offer additional operati

99 EnAdjusting the system parametersADVANCED OPERATIONEnglishYou can protect the settings you saved in the system memory of this unit from being accid

100 EnAdjusting the system parametersYou can set the maximum volume level so that this unit will not output sound beyond the limited volume level.1 Re

101 EnAdjusting the system parametersADVANCED OPERATIONEnglish3 Press / so that “TURN ON VOLUME” is displayed in the front panel display.4 Press E

102 EnAdjusting the system parameters4 Press / to switch between “MON CHK: YES” and “MON CHK: SKIP”.• Select MON CHK: YES to activate the monitor

103 EnAdjusting the system parametersADVANCED OPERATIONEnglish4 Press / to switch between “DEMO: ON” and “DEMO: OFF”.• Select DEMO: ON to activate

104 EnAdjusting the system parameters4 Press / to switch between “P.INPUT: ON” and “P.INPUT: OFF”.• Select P.INPUT: ON to enable the INPUT key on

105 EnAdjusting the system parametersADVANCED OPERATIONEnglish4 Press / to switch between “F.PANEL: ON” and “F.PANEL: OFF”.• Select F.PANEL: ON to

106 EnAdjusting the system parameters5 Press / to switch between “PRESET: RESET” and “PRESET: CANCEL”.• Select PRESET: RESET to reset all of the c

Remote control features107 EnADVANCED OPERATIONEnglishIn addition to controlling this unit, the remote control can also operate other AV components ma

Controls and functions9 EnINTRODUCTIONEnglish1 AUX 1 HDMI IN jackConnect your digital satellite tuner, cable TV tuner, digital air wave tuner, or game

108 EnRemote control features Operating your TVSet the operation mode selector to TV/AV, and press TV to select TV as the input source.The control ar

109 EnRemote control featuresADVANCED OPERATIONEnglish Operating your DVD player/recorderSet the operation mode selector to TV/AV and press DVD to se

110 EnRemote control features Operating your VCRSet the operation mode selector to TV/AV and press AUX1 to select VCR as the input source.The control

111 EnRemote control featuresADVANCED OPERATIONEnglishThe TV macro feature makes it possible to perform a series of operations with the press of a sin

112 EnRemote control features Setting macros for the TV without the tuning capability1 Press and hold CODE SET and press one of the input selector bu

Troubleshooting113 EnADDITIONAL INFORMATIONEnglishRefer to the chart below when this unit does not function properly. If the problem you are experienc

114 EnTroubleshootingProblem Cause RemedySee pageNo sound from the subwoofer.BASS OUT in SUBWOOFER SET is set to FRONT.Select SWFR.87The source does n

115 EnTroubleshootingADDITIONAL INFORMATIONEnglish Remote control HDMIProblem Cause RemedySee pageThe remote control does not work and/or function p

116 EnTroubleshooting DAB iPodIn case of a transmission error with no status message appearing in the front panel display and in the OSD, check the

Glossary117 EnADDITIONAL INFORMATIONEnglish Dolby DigitalDolby Digital is a digital surround sound system that gives you completely independent multi

Controls and functions10 EnE VIDEO OUT jackConnect to the video input jack of your TV via a composite analog video connection to display the OSD of th

118 EnGlossary LFE 0.1-channelThis channel is for the reproduction of low bass signals. The frequency range for this channel is 20 Hz to 120 Hz. This

DAB frequency table119 EnADDITIONAL INFORMATIONEnglishBand IIIDAB frequency tableFrequency Channel label218.640 MHz 11B220.352 MHz 11C222.064 MHz 11D2

Index120 En Numerics3 Beam... 615 Beam...

Specifications121 EnADDITIONAL INFORMATIONEnglishAMP SECTION• Maximum Output Power (JEITA)... 2 W (1 kHz

Specifications122 EnLimited Guarantee for European Economic Area (EEA) and SwitzerlandThank you for having chosen a Yamaha product. In the unlikely ev

iList of remote control codesTVADMIRAL 292, 293, 216AIWA 294, 276, 283, 284AKAI 295, 296ALBA296AOC 297BELL & HOWELL 292BESTAR 298BLAUPUNKT 229, 22

iiRCA 744, 792, 793SCIENTIFIC ATLANTA752, 753, 754, 789SONY 756, 757TOCOM 755UNIVERSAL 769, 772, 773, 774, 775VIEWSTAR 764, 766, 776, 777, 778, 779, 7

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONT

Connecting external components such as a TV or DVD player to this unit.Connect your TV or DVD player to this unit using appropriate cables as shown be

Press ENTER to start the AUTOSETUP procedure, and thenleave the room within 10 seconds.The following screen appears on the TV. Leave the roomwithin 10

Controls and functions11 EnINTRODUCTIONEnglishThis section describes the functions of the remote control used to control this unit. Some buttons marke

Controls and functions12 EnF DVD player/VCR control buttonsControl your DVD player or VCR (see pages 109 and 110).G My Beam microphoneCollects the tes

Controls and functions13 EnINTRODUCTIONEnglishThis section describes the functions of the remote control used to control DAB or iPod when the TV/AV mo

Installation14 EnThis section describes a suitable installation location to install this unit using a metal wall bracket, a rack or a stand.Depending

15 EnInstallationPREPARATIONEnglish Installation examplesExample 1Install this unit as close to the exact center of the wall as possible.Example 2Ins

16 EnInstallation Using a metal wall bracketYou can use the optional metal wall bracket (such as SPM-K30) to mount this unit on the wall in your list

Connections17 EnPREPARATIONEnglishThis unit is equipped with the following types of audio/video input/output jacks/terminal:For audio input• 2 optical

CAUTION: READ THIS BEFORE OPERATING THIS UNIT.i En1To assure the finest performance, please read this manual carefully. Keep it in a safe place for fu

18 EnConnections Cables used for connections HDMI cable Audio pin cable (supplied) Optical cable (supplied) Digital audio pin cable (supplied) 3.5 mm

19 EnConnectionsPREPARATIONEnglishThis unit is equipped with 2 HDMI input jacks and 1 HDMI output jack. If your TV and other components have HDMI jack

20 EnConnectionsFor audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO IN jacks on this unit. If your TV has an op

21 EnConnectionsPREPARATIONEnglishFor audio connection, connect the coaxial digital output jack on your DVD player/recorder to the DVD COAXIAL DIGITAL

22 EnConnectionsFor audio connection, connect the optical digital output jack on your digital satellite tuner or cable TV tuner to the TV/STB OPTICAL

23 EnConnectionsPREPARATIONEnglishFor audio connection, connect the TV/STB AUDIO IN jacks on this unit to the analog audio output jacks on your TV. Co

24 EnConnectionsConnect the analog audio output jack on your portable audio player to the AUX 3 input jack on the front panel of this unit. 3.5 mm ste

25 EnConnectionsPREPARATIONEnglishIf your component supports optical digital connections, connect the optical digital output jack on your component (e

26 EnConnectionsConnect the monaural input jack on your subwoofer to the SUBWOOFER jack on this unit.This connection alone does not output sound from

27 EnConnectionsPREPARATIONEnglishConnect the supplied DAB antenna to the ANTENNA jack on this unit and secure the DAB antenna vertically in an unobtr

PREPARATIONINTRODUCTIONBASIC OPERATIONADVANCED OPERATIONADDITIONAL INFORMATIONSETUPEnglish1 EnOverview ...

28 EnConnectionsOnce all other connections are complete, plug one end of the AC power supply cable into the AC IN terminal of this unit and then plug

GETTING STARTED29 EnSETUPEnglish1 Press and hold the mark on the battery cover and then open the cover.2 Insert the two supplied batteries (AA, R6,

Getting started30 En1 Press STANDBY/ON to turn on the power of this unit.The volume level appears in the front panel display, and the current input so

USING SET MENU31 EnSETUPEnglishThis section describes how to display the OSD (on-screen display) of this unit on your TV screen and to set the paramet

Using SET MENU32 EnThe following diagram illustrates the overall flow of the setup procedure.The flow chart of SET MENURun AUTO SETUP (IntelliBeam).Se

CHANGING OSD LANGUAGE33 EnSETUPEnglishThis feature allows you to select the language of your choice that appears in SET MENU of this unit.1 Set the op

AUTO SETUP (INTELLIBEAM)34 EnThis unit creates a sound field by reflecting sound beams on the walls of your listening room and by broadening the cohes

AUTO SETUP (IntelliBeam)35 EnSETUPEnglishThe supplied IntelliBeam microphone collects and analyzes the sound that this unit produces in your actual li

AUTO SETUP (IntelliBeam)36 En Assembling the supplied cardboard microphone standYou will find three separate parts (one circular part and two longitu

AUTO SETUP (IntelliBeam)37 EnSETUPEnglish• Make sure that your listening room is as quiet as possible while this unit is performing the AUTO SETUP pro

Overview2 EnIt is generally accepted that in order to fully enjoy the benefits of surround sound at home, you must endure the agony of wiring and inst

AUTO SETUP (IntelliBeam)38 En5 Press / to select BEAM+SOUND OPTIMZ, BEAM OPTIMZ only, or SOUND OPTIMZ only and then press ENTER.The following scre

AUTO SETUP (IntelliBeam)39 EnSETUPEnglish8 Check that the following screen is displayed on your TV.The results of the AUTO SETUP procedure are display

AUTO SETUP (IntelliBeam)40 En Error messages for AUTO SETUPBefore the AUTO SETUP procedure startsWhile the AUTO SETUP procedure is in progressIf one

USING THE SYSTEM MEMORY41 EnSETUPEnglishYou can save the current settings adjusted in SET MENU in the system memory of this unit. It is handy to save

Using the system memory42 En5 Press / to select MEMORY1, MEMORY2, or MEMORY3 and press ENTER.The following screen appears on your TV.6 Press ENTER

Using the system memory43 EnSETUPEnglish4 Press / to select LOAD and press ENTER.The following screen appears on your TV.5 Press / to select M

PLAYBACK44 EnYou can play back sound from the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one

45 EnPlaybackBASIC OPERATIONEnglishPress AUX1 (or AUX2) to play back a component connected to the AUX 1 (or AUX 2) jack on the rear panel of this unit

46 EnPlaybackPress VOLUME +/– to increase or decrease the volume level.The numeric value of the volume level appears in the front panel display.Contro

DAB (DIGITAL AUDIO BROADCASTING)47 EnBASIC OPERATIONEnglishDAB (Digital Audio Broadcasting), also known as digital radio, is a new way of radio broadc

Features3 EnINTRODUCTIONEnglishDigital Sound Projector™The Digital Sound Projector technology allows one slim unit to control and steer multiple chann

48 EnDAB (Digital Audio Broadcasting)Before tuning into DAB services, you must perform the initial scan.1 Press DAB repeatedly to select DAB.“Initiate

49 EnDAB (Digital Audio Broadcasting)BASIC OPERATIONEnglishFor DAB tuning, you do not tune in by station frequency (like FM/AM), but tune in via the c

50 EnDAB (Digital Audio Broadcasting)The PRESET MEMORY mode is used to assign up to 99 preset numbers to DAB services.1 Tune into the DAB service you

51 EnDAB (Digital Audio Broadcasting)BASIC OPERATIONEnglish PRESET tuningWith PRESET tuning, you can tune into DAB services by entering the assigned

52 EnDAB (Digital Audio Broadcasting)The DISPLAY key shows various information about the service currently being broadcast.yA letter that cannot be di

53 EnDAB (Digital Audio Broadcasting)BASIC OPERATIONEnglishYou can use the DAB MENU to adjust the DAB tuner parameters and ensemble/service registry l

54 EnDAB (Digital Audio Broadcasting)3 Press ENTER to confirm your selection.The unit begins scanning the selected band(s) for DAB ensembles.• During

55 EnDAB (Digital Audio Broadcasting)BASIC OPERATIONEnglishDynamic range is the decibel (dB) range between the highest and lowest sounds in a broadcas

56 EnDAB (Digital Audio Broadcasting)Use PRUNE LIST to delete a group of inactive ensembles and services from the DAB registry list.1 Access DAB MENU

USING IPOD™57 EnBASIC OPERATIONEnglishThis unit has the DOCK terminal on the rear panel that allows you to connect the Yamaha iPod universal dock (suc

Features4 EnThe “ ” logo and “IntelliBeam” are trademarks of YAMAHA Corporation.The “ ” logo and “Cinema DSP” are registered trademarks of YAMAHA Corp

58 EnUsing iPod™y• For a complete list of status messages that appear in the front panel display and in the OSD, see the “iPod” section in “Troublesho

59 EnUsing iPod™BASIC OPERATIONEnglish4 Press / and / to navigate through the iPod menu, and press ENTER to start playback of the selected son

ENJOYING SURROUND SOUND60 EnYou can enjoy multi-channel surround sound by changing the beam mode using the beam mode buttons on the remote control. Se

61 EnEnjoying surround soundBASIC OPERATIONEnglishOutputs normal sound from the front left and right channels and sound beams from the center and surr

62 EnEnjoying surround sound Decoder indicatorsDepending on the input source and the selected surround mode, the indicators in the front panel displa

63 EnEnjoying surround soundBASIC OPERATIONEnglishThis unit can decode 2-channel sources for 5.1-channel playback so that you can enjoy a variety of s

64 EnEnjoying surround soundYou can enjoy analog audio signals output from your TV in real surround sound.yBefore performing the steps below, set the

65 EnEnjoying surround soundBASIC OPERATIONEnglishYou can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the s

ENJOYING STEREO SOUND66 EnYou can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control.• When you

PLAYING BACK SOUND CLEARLY (MY BEAM)67 EnBASIC OPERATIONEnglishYou can improve listenability in a noisy environment by changing the beam mode to My Be

Using this manual5 EnINTRODUCTIONEnglish• This manual describes how to connect and operate this unit. For details regarding the operation of external

68 EnPlaying back sound clearly (My Beam)You can adjust the beam angle manually while playing back an input source. This function is also ideal if the

USING SOUND FIELD PROGRAMS69 EnBASIC OPERATIONEnglishThis unit is equipped with a variety of precise digital decoders that allow you to enjoy multi-ch

70 EnUsing sound field programs Sound field program descriptionsYou can select from the following sound field programs based on your listening prefer

71 EnUsing sound field programsBASIC OPERATIONEnglishYou can select from three different CINEMA DSP programs (MUSIC, MOVIE, and SPORTS) depending on t

72 EnUsing sound field programs Movie programsSelect this CINEMA DSP program when you play back movie sources, especially the ones encoded in Dolby D

73 EnUsing sound field programsBASIC OPERATIONEnglish Turning off CINEMA DSP programsTurn off the CINEMA DSP programs if you want to enjoy the origin

USING THE MUSIC ENHANCER74 EnYou can use the Music Enhancer of this unit to improve the sound nearest to the original depth and width of compression a

USING THE VOLUME MODE (NIGHT LISTENING ENHANCER/TV VOLUME EQUAL MODE)75 EnBASIC OPERATIONEnglishThe night listening enhancers are designed to improve

USING THE SLEEP TIMER76 EnUse this feature to automatically set this unit to the standby mode after a specified period of time. The sleep timer is use

77 EnUsing the sleep timerBASIC OPERATIONEnglish Canceling the sleep timer1 Set the operation mode selector to YSP.2 Press SLEEP repeatedly until “SL

Supplied accessories6 EnCheck that you have received all of the following parts.Supplied accessoriesSTEREO MY SUR.MY BEAMMEMORYSEARCHSLEEPINPUTMODEENH

DISPLAYING THE INPUT SOURCE INFORMATION78 EnYou can display the format and sampling frequency of the current input signal in the front panel display.

USING THE HDMI CONTROL FEATURE79 EnBASIC OPERATIONEnglishYou can operate the following functions using the remote control supplied with your TV if thi

MANUAL SETUP80 EnTo achieve the best quality surround sound, you can use MANUAL SETUP to fine-tune the listening environment parameters, as well as to

81 EnMANUAL SETUPADVANCED OPERATIONEnglishUse the remote control to access and adjust each parameter.yYou can adjust the SET MENU parameters while the

82 EnMANUAL SETUPUse to manually adjust the various parameters related to the sound beam output.SET MENU → MANUAL SETUP → BEAM MENUyYou can adjust the

83 EnMANUAL SETUPADVANCED OPERATIONEnglish• Select ANGLE TO WALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the

84 EnMANUAL SETUPHORIZONTAL ANGLE (Horizontal angle)Use to adjust the horizontal angle of sound beams for each channel. By adjusting the horizontal an

85 EnMANUAL SETUPADVANCED OPERATIONEnglishFOCAL LENGTH (Focal length)Use to set the distance from the front of this unit to the focal point of output

86 EnMANUAL SETUP IMAGE LOCATION (Image location)Use to adjust the direction from which the front left and right channel sound is heard so that each

87 EnMANUAL SETUPADVANCED OPERATIONEnglishBASS OUT (Bass out)Low-frequency (bass) signals can be directed to the subwoofer and/or the front left and r

Controls and functions7 EnINTRODUCTIONEnglish1 Front panel displayShows information about the operational status of this unit.2 Remote control sensorR

88 EnMANUAL SETUP DD/DTS Dynamic Range (Dynamic range of Dolby Digital and DTS signals)Use to select the amount of dynamic range compression. This se

89 EnMANUAL SETUPADVANCED OPERATIONEnglish INPUT MODE (Input mode)Use to designate the input mode for the input sources connected to the DIGITAL IN j

90 EnMANUAL SETUP INPUT RENAME (Input rename)Use to change the name of the input source in the OSD and the front panel display. Press an input select

91 EnMANUAL SETUPADVANCED OPERATIONEnglishVIDEO INFO (Video information)Use to display the video information of the current input signal.Choices: HDMI

92 EnMANUAL SETUP• Select ON to enable the HDMI control. The signals input at the HDMI IN jacks are output at the HDMI OUT jack when this unit is in t

93 EnMANUAL SETUPADVANCED OPERATIONEnglish OSD SET (OSD settings)Use to adjust the display position and to set the display time of the OSD.OSD SHIFT

Adjusting the audio balance94 EnYou can adjust the sound beam output level of each channel by using the test tone or the audio output being played bac

95 EnAdjusting the audio balanceADVANCED OPERATIONEnglish5 Press TEST when you have completed all your adjustments.• All channel levels cannot be adju

96 EnAdjusting the audio balance3 Press / to adjust the channel volume.Control range: –10.0 dB to +10.0 dB4 Wait for a few seconds without operati

Selecting the input mode97 EnADVANCED OPERATIONEnglishYou can select the type of audio input signals of the selected input source according to your pr