Yamaha QL5 Manual Página 111
- Página / 311
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Monitor and Cue functions
Reference Manual
111
Meter field
9
ACTIVE CUE indicator
Lights to indicate the type of cue currently being monitored (input: blue, DCA: yellow,
output: orange).
0 CLEAR CUE button
Cancels all cue selections simultaneously.
NOTE
If you press the CUE meter in the Function Access Area, all cue selections will be cleared.
A Meter section
This field indicates the output level of the cue L/R channels.
B CUE OUTPUT button
Switches the cue output on or off.
C CUE LEVEL knob
Indicates the output level of the cut out. You can adjust the values by using the [TOUCH
AND TURN] knobs.
D CUE OUT PATCH button
Press this button to open the PORT SELECT window, in which you can select an output
port to patch to the cue out L/R channels.
*1. QL1: 1-32
*2. QL1: 1-8
FADER CUE RELEASE field
Move the fader of the channel that is cued to set the FADER CUE RELEASE function for
releasing the cue.
E ON button
Switches the FADER CUE RELEASE function on or off.
F THRESHOLD knob
Sets the fader value for releasing the cue. If the fader value exceeds the value set with
this knob, the cue is released.
SOLO field
Determines the Solo function parameters.
With the Solo function, only the signal of the input/output channel or DCA for which the [CUE]
key is pressed is output from MIX, MATRIX, and STEREO on each bus. All other channels or
DCA are muted.
G SOLO SAFE popup button
When the SOLO SAFE popup button is pressed, the SOLO SAFE popup window (which
specifies soloed channels that are not muted) appears.
Here you can specify the channels that will be excluded from Solo operations. (You can
specify more than one.) The channels that are selected here will not be muted when
SOLO mode is enabled. This function is convenient if, for example, you want to protect
certain channels from being set to SOLO mode accidentally, such as the main STEREO
channels and MIX channels that send signals to an external recorder.
DANTE1–64
*1
Output channels 1–64 to audio network
*1
OMNI1–16
*2
OMNI OUT jacks 1–16
*2
DIGI OUT L/R DIGITAL OUT jack on the QL unit
SLOT1-1–SLOT2-16 Output channels 1–16 of an I/O card installed in slots 1–2
- Reference Manual 1
- Contents 2
- Function Tree 4
- SELECTED CHANNEL section 10
- Reference Manual 10
- 4 Mute group select buttons 11
- 5 MUTE SAFE button 11
- 6 DCA group indicators 11
- Channel Strip section 12
- DCA group field 15
- Mute group field 15
- Input and output patching 16
- PATCH/NAME screen 17
- CH SELECT screen 19
- 77 663 9 20
- INSERT screen (8ch) 21
- 2 Port select buttons 22
- 3 CLOSE button 22
- DIRECT OUT screen (8ch) 23
- Input channels 25
- 2 Icon select buttons 27
- 3 Sample name setup buttons 27
- When selecting the NAME tab 27
- Making HA (Head Amp) settings 28
- GAIN/PATCH window (8ch) 29
- 2 PATCH button 30
- 3 HA section 30
- GAIN/PATCH window 31
- STEREO/MONO bus 33
- TO STEREO/MONO window (8ch) 34
- 8 LCR button 35
- 4. This 35
- 9 CSR knob 35
- TO STEREO/MONO window 36
- MATRIX bus 38
- MIX SEND/MATRIX SEND window 39
- SENDS ON FADER mode 40
- INPUT DELAY window (8ch) 41
- LR-MONO 43
- Setting procedure 43
- 1 LR-MONO SELECT field 43
- 2 LR-MONO SELECT button 43
- Setting Surround mode 44
- SELECTED CHANNEL VIEW screen 44
- OVERVIEW screen 45
- SURROUND PAN 1CH screen 46
- 1 Surround graph 47
- 2 L/R F/R switch button 47
- Channel library operations 48
- OUTPUT channels 49
- MONO bus 51
- MONO channels to MATRIX buses 53
- 6 PRE/POST button 54
- 7 SEND ON/OFF button 54
- 8 SEND PAN/BALANCE knob 54
- 9 SEND LEVEL knob 54
- OUTPUT PORT screen 55
- 6 DELAY button 56
- 7 Ø (Phase) button 56
- 8 GAIN knob 56
- 9 Level meter 56
- EQ and Dynamics 58
- HPF/EQ window (8ch) 60
- Using dynamics 61
- DYNAMICS1/2 window (1ch) 62
- DYNAMICS1/2 window (8ch) 63
- ST IN (QL1), OUTPUT) 64
- EQ library 64
- Dynamics library 64
- Channel Job 65
- Mute group 67
- 1 CLEAR ALL button 68
- 3 Mute group assign field 68
- 4 NAME EDIT button 68
- Using mute groups 69
- Using the Mute Safe function 70
- RECALL SAFE MODE window 71
- 5 Channel select button 72
- 6 Selected channel display 72
- A CLOSE button 73
- Channel Link function 74
- 1 Input channel display field 75
- 2 Link indicator 75
- 3 LINK PARAMETER field 75
- 4 SEND PARAMETER field 76
- 5 INPUT/OUTPUT button 76
- Channel link operations 76
- CH LINK SET window 78
- CH COPY MODE window 79
- CH MOVE MODE window 80
- 1 5 2 3 4 80
- CH DEFAULT MODE window 81
- About Mix Minus 82
- Scene memory 83
- Storing and recalling scenes 84
- SCENE LIST window 85
- Recalling a scene 86
- Editing scene memories 88
- Scene memory editing 89
- Copying and pasting a scene 89
- Clearing a scene 89
- Cutting a scene 90
- Inserting a scene 90
- GLOBAL PASTE window 91
- FOCUS RECALL window 94
- Using the Fade function 95
- FADE TIME window 96
- 1 GPI OUT CONTROL buttons 97
- 2 CURRENT SETTING field 97
- SONG SELECT window 98
- Using Preview mode 99
- Monitor and Cue functions 100
- Using the Monitor function 101
- MONITOR screen 102
- MONITOR window 103
- 0 Meter field 104
- A ASSIGN field 104
- 8 MONITOR FADER field 104
- 9 MONITOR DELAY field 104
- MONITOR SOURCE SETUP screen 106
- Using the Cue function 107
- Operating the Cue function 108
- CUE window 110
- CUE screen (Surround mode) 114
- Talkback and Oscillator 115
- TALKBACK window 116
- Using the Oscillator function 117
- OSCILLATOR window 118
- 3 ASSIGN section 119
- 4 Meter section 119
- 5 OSCILLATOR OUTPUT button 119
- INPUT/OUTPUT/RTA tab 120
- INPUT METER screen 120
- OUTPUT METER screen 120
- Fader level and meter display 121
- METERING POINT field 121
- PEAK HOLD button 121
- SHOW SEND LEVEL button 122
- RTA METER screen 122
- (CUE B L,R) POST EQ 123
- (CUE B L,R) 123
- Function Access Area screen 124
- Premium Rack 125
- Virtual rack operations 126
- 4 INPUT PATCH button 127
- 5 OUTPUT PATCH button 127
- 6 Rack container 128
- Graphic EQ operations 129
- Inserting a GEQ in a channel 130
- GEQ EDIT window 130
- Using the 31BandGEQ 131
- GEQ EDIT window (31BandGEQ) 132
- Using the Flex15GEQ 132
- GEQ EDIT window (Flex 15GEQ) 133
- Parametric EQ operations 133
- PEQ EDIT window 133
- PEQ EDIT window (8PEQ) 135
- About AUTOMIXER 136
- Editing the internal effects 138
- STEREO type effects 139
- MIX type effects 139
- 1 Effect title/type 140
- 2 Input/output meters 140
- EFFECT EDIT window 141
- Using the Tap Tempo function 143
- Using the Premium Rack 146
- COMPRESSOR LIMITER 153
- Premium Rack libraries 157
- Using an I/O device 158
- DANTE INPUT PATCH window 159
- PORT SELECT window 160
- OUTPUT PATCH window 160
- I/O DEVICE screen (I/O page) 161
- 0 A67 8 9 163
- input/output is used 164
- 2 HA gain 165
- 3 Head amp HPF on/off 165
- I/O DEVICE HA window 166
- Remotely controlling an amp 167
- NAI48-ES 170
- Daisy chain network 171
- Ring connection 171
- 1 EXTERNAL HA field 172
- 2 ID/Model name/+48V master 172
- 3 Virtual racks 172
- EXTERNAL HA window 173
- INTERNAL HA window 174
- Basic MIDI settings 175
- 1 TERMINAL field 177
- 2 PORT NO. field 177
- 3 OK button 177
- 1 CH field 177
- 2 OK button 177
- 1 PROGRAM CHANGE field 178
- 2 PROGRAM CHANGE MODE field 178
- MIDI PROGRAM CHANGE window 179
- MIDI CONTROL CHANGE window 182
- Recorder 183
- CH SELECT window 184
- 3 4A0987 5 6 185
- RECORDER screen 187
- Editing the title list 188
- Required devices and software 189
- Word clock settings 190
- Dante Accelerator settings 190
- Setting up Dante Controller 191
- Setting up DAW software 191
- Audio recording and playback 191
- Preparing the project 192
- Recording into a project 192
- NUENDO LIVE SETUP window 193
- Playing a multi-track project 195
- About the SETUP screen 196
- BUS SETUP field 197
- D BUS SETUP button 197
- E SURROUND SETUP button 197
- User settings 199
- CREATE USER KEY window 201
- Logging-in 201
- Logging-in as Guest 202
- Logging-in as a User 202
- Changing the password 203
- Changing the user level 204
- Preferences 206
- USER DEFINED keys 208
- USER DEFINED knobs 214
- Custom fader bank 216
- USER SETUP window 217
- Console Lock 218
- SAVE/LOAD window 219
- SAVE SELECT screen 221
- 5 MULTI SELECT button 222
- 6 SELECT ALL button 222
- 7 CLEAR ALL button 222
- LOAD SELECT screen 223
- 1 2 3 4 5 224
- Formatting a USB flash drive 225
- Word clock and slot settings 226
- WORD CLOCK/SLOT window 227
- Using cascade connections 228
- QL BQL A 228
- 2 CASCADE LINK buttons 229
- 1 ATT knobs 231
- BUS SETUP window 232
- 1 2 3 4 5 6 7 233
- Setting the network address 234
- NETWORK window 235
- Daisy chain connections 239
- Redundant connections 239
- DANTE SETUP window 240
- 1 DEVICE LABEL 242
- 2 INPUT/OUTPUT knobs 242
- 3 Device label entry keyboard 242
- REMOTE HA settings 243
- REMOTE HA SELECT window 243
- Displaying the device status 244
- Messages 244
- Error messages 245
- Warning messages 245
- Using GPI IN 246
- MIDI/GPI screen (GPI page) 247
- Using GPI OUT 247
- Using FADER START 249
- 5 MODE field 250
- Help function 251
- Other functions 253
- ∞ dB (all the way down) 254
- EXIT button 257
- Warning/Error Messages 259
- Data List 263
- EQ Library List 264
- DYNAMICS Library List 265
- Data List 266
- * At fs=44.1 kHz 266
- Dynamics Parameters 267
- COMPRESSOR 268
- EXPANDER 268
- Effect Type List 269
- Effects Parameters 270
- STEREO REVERB 271
- EARLY REF 271
- GATE REVERB, REVERSE GATE 271
- MONO DELAY 271
- STEREO DELAY 271
- MOD. DELAY 272
- DELAY LCR 272
- CHORUS 272
- FLANGE 273
- SYMPHONIC 273
- PHASER 273
- DYNA.FLANGE 273
- DYNA.PHASER 274
- HQ.PITCH 274
- DUAL PITCH 274
- TREMOLO 274
- AUTOPAN 275
- ROTARY 275
- RING MOD 275
- MOD.FILTER 275
- DYNA.FILTER 275
- REV+CHORUS 276
- REVCHORUS 276
- REV+FLANGE 276
- REVFLANGE 276
- REV+SYMPHO 277
- REVSYMPHO 277
- REVPAN 277
- DELAY+ER 277
- DELAYER 278
- DELAY+REV 278
- DELAYREV 278
- DISTDELAY 279
- MULTI FILTER 279
- FREEZE 279
- DISTORTION 279
- AMP SIMULATE 280
- COMP276 280
- COMP276S 280
- COMP260 280
- COMP260S 280
- EQUALIZER601 281
- OPENDECK 281
- M.BAND DYNA 281
- M.BAND COMP 282
- Portico5033 282
- Portico5043 282
- Opt-2A 283
- Dynamic EQ 283
- Buss Comp 369 283
- Automixer Parameters 284
- NRPN parameter assignments 288
- Input channels 292
- MIX Channels 294
- MATRIX Channels 295
- STEREO, MONO Channels 296
- BUS SETUP 297
- SURROUND BUS 297
- MIDI Data Format 298
- 2 SYSTEM REALTIME MESSAGE 299
- 3 SYSTEM EXCLUSIVE MESSAGE 299
- 4 PARAMETER CHANGE details 300
- 4.5 EXIST LIBRARY RANGE 302
- 4.7 FUNCTION CALL – MODULE – 303
- 4.9 LEVEL METER DATA 304
- Input/Output Specifications 305
- Electrical characteristics 306
- Dynamic Range. Fs= 48 kHz 307
- Sampling Frequency 307
- Mixer Basic Parameters 308
- MIDI Implementation Chart 310
Manuais e produtos relacionados com Software Yamaha QL5
Software Yamaha MOX6 Guia de Instalação
(6 páginas)
(6 páginas)
Software Yamaha QL5 Manual
(294 páginas)
(294 páginas)
Software Yamaha CL5 Manual
(302 páginas)
(302 páginas)
Software Yamaha MOXF8 Manual do Proprietário
(57 páginas)
(57 páginas)
Software Yamaha Amp Editor Manual do Proprietário
(211 páginas)
(211 páginas)
Software Yamaha CL5/CL3/CL1 V1.5 Manual do Utilizador
(277 páginas)
(277 páginas)
Software Yamaha V4.0 Manual do Proprietário
(526 páginas)
(526 páginas)
Software Yamaha V3 Manual do Proprietário
(83 páginas)
(83 páginas)
Software Yamaha MOX6 Manual
(160 páginas)
(160 páginas)
Software Yamaha XF6 Manual
(255 páginas)
(255 páginas)
Software Yamaha MOXF8 Manual
(163 páginas)
(163 páginas)
Software Yamaha MOX6 Manual do Proprietário
(57 páginas)
(57 páginas)
Software Yamaha PSR-S975 Manual
(136 páginas)
(136 páginas)
Software Yamaha Tyros3 Manual
(130 páginas)
(130 páginas)
Software Yamaha FP7210A Manual do Utilizador
(2 páginas)
(2 páginas)
Software Yamaha HS650A Manual do Utilizador
(2 páginas)
(2 páginas)
Software Yamaha HS850 Manual do Utilizador
(1 páginas)
(1 páginas)
Santec Caméras de sécurité manuels d'utilisation
La liste de Santec Caméras de sécurité produits contient 20 manuels d'utilisation pour les modèles 16. Tous les guides d'utilisation en format pdf peuvent être téléchargés ou consultés en ligne.
Comentários a estes Manuais