Yamaha Sound editor Manual do Proprietário

YAMAHA Wave Editor TWEVersion 2.2.0for MacintoshOwner's manual (1/3)The TWE wave editor (hereafter referred to as TWE) is software for digitally

If you click on the time axis markings (Time Ruler) of the waveform display area, the location at which you clicked will be specified as the playback

This numerically indicates the loop region. The start, end, and length of the loop region are displayed as a number of samples (Sample) and as hours/m

4.7. Waveform display (Waveform)This area shows a magnified portion of the currently opened sound file.You can use the horizontal and vertical scroll

loop region shown in the time axis ruler, the mouse pointer will change shape, and you can drag to left or right to modify the start/end points of the

- continues to 2/3 -- 14 -

YAMAHA Wave Editor TWEVersion 2.2.0for MacintoshOwner's manual (2/3)[5. File menu]5.1. New...This command creates new sound data. When you select

(The data which was originally on the disk (meaningless garbage) will be used without change.)•Square...(Square wave data will be created.)•Sawtooth..

[Save]Save the edited content and close the Waveform Window.[Don't Save]Close the Waveform Window without saving the edited content. Your edits w

raised, the noise produced during conversion will decrease, but the high frequency range will be cut.<Sampling Rate>Specify the sampling frequen

5.13. Export To Sampler...When an external Yamaha sampler (A3000/4000/5000, EX5/5R7) is connected via SCSI, this command transmits sound data to the s

•The company names and product names in this owner's manual are the trademarks or registered trademarks of their respective companies.•The screen

5.16. Page Setup...This command opens the standard Macintosh page setup dialog box, allowing you to specify the page setup settings that will be used

6.3. CopyThis command copies the region currently selected in the waveform display to the TWE clipboard.6.4. PasteThis command pastes the waveform whi

6.8. TrimThis command leaves only the waveform in the selected region, and deletes the portions of the waveform which lie before and after the selecte

This command flips the selected region of the waveform from left to right. 6.11. InvertThis command inverts (up/down) the selected region of the wavef

immediately before the end of the loop region will be crossfaded and rewritten. If you select Sustain + Release type, the waveform immediately before

In the case of a presence filter, this specifies the steepness of the peak or valley that is produced by boosting or cutting the signal level of the s

6.18. Gain...This command modifies the overall amplitude (volume) of the selected region of the waveform. To change the amplitude (volume), drag the R

selected region will be calculated, and the inverse of this value will be added to each sample. After this command has been executed, the value that w

Maximize the vertical display resolution.<Vertical Full Zoom Out>Minimize the vertical display resolution.<Horizontal Full Zoom In>Maximiz

<Level>If either the start point or the end point are changed to a location that is near the level of the other point (the existing end point or

5.14. Load Preferences...5.15. Save Preferences As...5.16. Page Setup...5.17. Print...5.18. Quit6. Edit menu6.1. Undo (or Redo)6.2. Cut6.3. Copy6.4. P

<Time>The time axis will be in units of time.<Samples>The time axis will be in units of samples.7.9. Level RulerSelect whether the amplitu

<Stop (or Start) Background Scanning>Specify whether to stop/start scanning of data that is being performed in the background.<Refresh All>

displayed tab panel will return to their default settings. If you click the [Revert Panel] button, the contents of the currently displayed tab panel w

<Window Colors>•Tag...The background color of the Tag Window•Transport...The background color of the Transport Window•Waveform...The background

*Pressing the return key or the enter key in the Colors or Others panels will execute [Cancel], but when the Shortcuts panel is open, pressing the ret

correspondingly better. On fast computers you will want to uncheck this item, and check it on slower computers.•Up/Down sensitive Auto SnapIf this is

9.3. CascadeAll Waveform windows will be displayed in overlapping "stair-step" fashion.9.4. Tile HorizontallyAll Waveform windows will be sh

YAMAHA Wave Editor TWEVersion 2.2.0for MacintoshOwner's manual (3/3)[10. List of shortcut key default settings]By using shortcut keys, you can us

selected region. Insert [cmd]+[I] Insert the waveform from

Horizontal Zoom Out [G] Decrease the horizontal display resolution by

8.3. Preferences …9. Window menu9.1. Hide (or Show) Tag Window9.2. Hide (or Show) Transport9.3. Cascade9.4. Tile Horizontally9.5. Tile Vertically 9.6.

windows. Select Tag Window [cmd]+[0] Makes the Tag window

- Pitch Shift was added to the Edit menu.- Auto Snap was added to the View menu.- Cascade, Tile Horizontally, and Tile Vertically were added to the Wi

<File formats>•Apple AIFF (displayed by TWE as "AIFF")•Digidesign Sound Designer II (displayed by TWE as "Sd2f")•Microsoft W

displays various settings of the sound file) will appear. The following chapters explain the various parts of TWE's windows.[3. Tag Window and Tr

Moves the playback start location (Play Location) to the beginning of the sound data.<Stop> Stops playback/recording.<Play> Begins playbac

display refer to "4.8. Overall waveform display."*If the OS you are using is earlier than System 7.5, there will be cases in which it will n

<Samples>Displays the total number of samples in the sound file.<Data size>Displays the size (number of bytes) of the sound file.<Modif