Yamaha QL5 Guia do Utilizador descarregar pdf (Página 16)

QL5/QL1 Firmware Update Guide 16

Disable all but one of the network interfaces on your computer.

You should also disable the wireless LAN.

Select [Start]→[All programs]→[Audinate]→[Dante Firmware Update Manager]→[Dante Firmware

Update Manager ] , then right-click and select “Run as Administrator.”

The Dante Firmware Update Manager will start up.

・ The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

If you see the interface selection screen, select the interface card to connect the Dante device.

Click [Failsafe Recovery].

When the QL is detected, click the [Stop Scan] button.

If several minutes have passed without detection, use Dante Controller to check whether the cable might be

disconnected or broken, whether the TCP/IP settings are correct, and whether the QL is running.

10.

Select the check box of the detected QL.

11.

Click [Start].

A pop-up is displayed confirming that you wish to proceed.

12.

Click [OK] to start the recovery.

Firmware Update Manager will display "Processing Safe Recovery", and then "Safe recovery Done" when the

device(s) are recovered.

1 2 ... 11 12 13 14 15 16 17

Sem comentários

Yamaha QL5 Guia do Utilizador Página 16