Yamaha V3 Guia do Utilizador descarregar pdf (Página 15)

R Remote Version 3 User’s Guide 15

Device Selection Area

When you click a display switching button, the corresponding R series unit is shown

in the information display area and in the main area.

With a display switching button selected, pressing the left button makes all

indicators of the corresponding R series unit blink, allowing you to identify the

corresponding unit.

When you right-click a display switching button, the following context menu

appears.

Command

Summary

[Mount]

Opens the "Mount" window. Select the device that you want to mount.

[Connect]

Synchronizes with the selected device.

[Disconnect]

Disconnects from the selected device.

[Properties] Open the “Properties” dialog box.

The connection status is shown below each display switching button.

Indication

Status

VIRTUAL

The device is mounted without the existence of the actual device.

CONNECTING

Currently synchronizing with the device.

CONNECTED

Currently synchronized with the device.

DISCONNECTED

Synchronization with the device is possible, but is currently disconnected by the

[Disconnect] command. Alternatively, communication has been interrupted, or

connection failed.

DUPLICATED

More than one device of the same UNIT ID exists. Eliminate any UNIT ID

conflict between devices.

The VIRTUAL indication is also shown if the device is in any of the following states.

・Device is not powered-on.

・Not connected to the computer.

・Communication is impossible due to incorrect settings.

Information Display Area

This area shows the UNIT ID and name of the selected device.

To check the firmware version or IP address, choose [File] menu -> [Device Information] to open the

"Device Information" dialog box.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Sem comentários

Yamaha V3 Guia do Utilizador Página 15