Yamaha 101 Manual do Utilizador Página 1

Recording 101 Yamaha Corporation of America 6600 Orangethorpe Ave. Buena Park, CA 90620 USA Customer Support: 714-522-9000

4. Cursor to OK and press the [ENTER] key. The TITLE EDIT popup window will appear, allowing you to name your song. 5. Assign a name to your

The Input Setting popup window will appear. 2. While playing the instrument, turn the GAIN knob up to adjust the input level. The meter on the ri

3. Press the [TRACK SEL] key of the track that you want to record on. The selected input channel will now be connected to the selected track. B

If the mistake is only a short one and you just need to fix the mistake and not erase the rest of the track you can first punch-in at the point wher

2. Press the [INPUT SEL] key for the input channel that you are recorded from. 3. Press the [TRACK SEL] key of the track that you recorded on. The

The [INPUT SEL] keys and the [TRACK SEL] keys will now be red and blinking. 4. Press the [INPUT SEL] key for the input channel that you are going t

Setting the Basic Levels A basic starting point in the mixdown process is to first set the levels for all of the individual tracks. 1. Lower all

There are many different approaches to setting the levels in the mixdown process. Some people prefer to start with the vocals and then work their way

3. Turn the [PAN] knob to adjust the panning of the selected track. 4. To adjust the panning for additional tracks first press the [TRACK SEL] key

harmony then it would usually be panned up the center also. If there are multiple background vocals they would normally be panned just a little off c

AW16G Recording 101 - Table of Contents Introduction 1 AW16G Features 1 Setting up the AW16G 2 Connecting the Monito

3. Use the [DATA/JOG] wheel to select the desired EQ preset. 4. Cursor to the RECALL button in the LCD and press the [ENTER] key. This is for b

3. Use the [DATA/JOG] Wheel to select a desired preset. 4. Cursor to the Recall button and press the [ENTER] key. 5. To adjust the dynamic pr

3. Cursor to the RECALL button on the screen and press the [ENTER] key. 4. Press the [EFF 1] knob once to access the EFFECTS SEND screen. 5. Whi

4. After the song has finished, press the [STOP] key to end the recording of the Stereo Track. Tip: In order to have a loud CD, the Stereo Meter (L

NOTE: If an error message appears indicating that there is no stereo track you may need to save the song before the AW16G will recognize the stereo tr

Glossary Note: Additional glossary words can be found online at the following web address: http://solutionsnetwork.yamaha.com A/D Converter: Analog

Dynamics Processor: A signal processing device that is used to correct or control signal levels. They are able to compress, expand, compress-expand (c

TRS: Used to refer to a Tip, Ring, Sleeve cable, connector, or jack. Also known as balanced 1/4". Inputs 3-8 of the AW16G use TRS jacks. XLR:

Adjusting the Dynamic Processors 17 Using the Dynamics Library 17 Using the Internal Effects

Introduction Congratulations on your purchase of the AW16G! The AW16G is a very powerful and easy to use digital audio workstation that will all

Setting up the AW16G Before you begin recording it is necessary to connect the AW16G with the equipment that it is to be used with. Step 1: Connec

With Unpowered Monitors If no monitors are available, or if you prefer, headphones can be used for monitoring. The headphones would be connected

more comfortable recording other instruments first and then adding the drums later on this will work as long as you record with a metronome. This ens

If a condenser microphone is to be connected to either input 1 or 2, the phantom power must be turned on. If a condenser microphone is to b

Recording Now that everything is set up and connected properly you can begin recording. The first step in the recording process is to create a new