Yamaha V150A Manual do Utilizador descarregar pdf (Página 30)

ICD.CONTROL FUNCTIONS

SO SIMPLE  AND SIMPLY PERFECT.



 Standard manager

The standards library enables quick access to a list of standards tests.

In each standards list, the test modes are preprogrammed with substi-

tution or closed loop method. Custom tests can also be saved into the

standards list.

 System behavior during DUT monitoring

When using Fail  and  and an external measuring device

Fail : > Stops and ends the test

Fail : > The following behavior options can be selected in case of

a Fail  event:

> Entry in test graph and report

> Interruption of test with analysis option

> Full or semi-automatic disturbance threshold search

Disturbance threshold search

With this function, users can easily determine the disturbance

threshold. If the DUT is affected at a certain frequency, the software

automatically starts to search for the limit value and reports the

final level at which the DUT was unaffected by interference.

Control is manual or fully automatic.

 Vector test routines

You can define and link all of the testing vectors yourself. You can

specify the start and end values of the vector (frequency and ampli-

tude), the modulation type, modulation depth, frequency intervals,

contact time, etc.

You can create special test frequencies in an Excel file.

icd.control uses these values for the test.

 Set-up for calibration and testing

When you open opens a test routine, you can select previous calibra-

tion data (for BCI clamps and stripline) from the library or create your

own calibration file. icd.control displays both the calibration set-up

(image) and the test set-up (image ), so you don‘t have to spend

extra time searching in the respective standard.

 Calibration procedure (e.g. per ISO -)

When the calibration routine is run, the required test level for each

frequency is noted and saved in the respective database. This ensures

that in the subsequent test, the entire frequency range can be tested

at a consistent level. This eliminates error because in the background,

the software monitors all of the operations.

ICD.CONTROL FUNCTIONS

ROUTINELY SUCCESSFUL





 Measuring device connection

icd.control enables the connection of external measuring equipment

such as digital multi meters, oscilloscopes, spectrum analyzers,

and all types of measurement value recorders with interfaces. Many

measuring devices already exist in the library. The measuring devices

installed in the CWS N are also available in a dedicated field and

can be used for additional measurements.

 Configuring an external measuring device

Here a simple method is used to configure all of the measuring

devices used for monitoring the DUT. In addition, trigger conditions,

measurement windows, measurement limit values as well as fail func-

tions and alarms can be activated and entered. icd.control support

GPIB, RS, USB and Ethernet interfaces.

 Active test routines as per ISO -

Based on the clearly arranged measurement windows and graphics,

you can observe the test run at all times. The measured forward and

reflected power values as well as the injected current are displayed

in addition to the applied power and current values. Moreover, the

impedance behavior of the DUT is calculated from the measured

values and displayed as well. This delivers detailed information for

evaluating the behavior of the DUT.

 Test routine as per ISO - Closed Loop

The closed loop process requires regulation of the output power. The

induced current is measured with a probe, compared with the desired

level and adjusted. This ensures that the correct level has been

tested.

 Test routine with DUT monitoring

icd.control can control up to  measuring devices at once for monito-

ring/checking the DUT. The respective measurement values are displa-

yed with the frequency information in a clearly arranged graphic.



ICD.CONTROL SOFTWARE

FOR CWS N

icd.control

Software





 

AUTOMOTIVE > EMC TEST SYSTEMS FOR AUTOMOTIVE ELECTRONICSAUTOMOTIVE > EMC TEST SYSTEMS FOR AUTOMOTIVE ELECTRONICS

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 45 46

Comentários a estes Manuais

Sem comentários

Yamaha V150A Manual do Utilizador Página 30

Comentários a estes Manuais